Ultrasonic wind speed and direction sensors are currently widely used in power safety monitoring, bridges and tunnels, marine ships, urban environmental monitoring, road safety, and other fields.

It is a small ultrasonic anemometer for outdoor measurement of wind speed and direction. It has no movable parts, compact design, high protection level, easy to install, and can be used in harsh environments. This ultrasonic anemometer price is very cheap and meets the needs of most users.

Small Ultrasonic Anemometer

Ultrasonic anemometer is a measuring instrument that uses ultrasonic waves to propagate in the air to measure wind speed and direction. Its internal use low-power chips, power consumption is only 0.12W. It is especially suitable for solar or battery-powered environments with relatively high power consumption. Thanks to new technology and new technology, the structure is more compact and compact. Optional temperature and air pressure modules are also provided. The shell is made of high-strength ABS material, which is convenient for users to use in different environments.

Ultrasonic Anemometer Parameters

Power supply: 10-30V DC
Range: Wind speed:0～40m/s, Wind direction:0~360°
Accuracy: Wind speed: ±0.5+2%FS, Wind direction: ±3°
Resolution:Wind speed: 0.01 m/s, Wind direction: 1°
Working environment: -40～80℃, 0～95%RH
Wind resistance: 75 m/s
Response time: 1S
Protection level: IP65
Output signal: 4~20mA, 0~5V, 0~10V, RS485
Starting wind speed: 0.5m/s

Place of origin: China

Advantages - Ultrasonic Anemometer

This small ultrasonic anemometer has multiple output modes, rs485, 0-5v, 0-10v, 4-20ma. You can choose according to your needs.

High quality

The shell of this small ultrasonic anemometer is made of high-quality ABS material, which can effectively resist rain, snow, and ultraviolet rays. The four ultrasonic terminals adopt an upside-down design to avoid measurement errors caused by rain, snow, or sand accumulation.

Quick install

This ultrasonic anemometer can be equipped with a built-in electronic compass and a device with a built-in electronic compass. There is no longer a position requirement during installation, just ensure that it is installed horizontally. Therefore, it can be used in mobile occasions such as marine ships, automobile transportation, etc., and there is no direct requirement during installation.

Long using life

The ultrasonic anemometer has a compact design, the entire structure does not have any parts that need to be moved, and there is no mechanical wear during use, so it has a long service life. Once installed, there is no need for maintenance and on-site calibration during use, which saves worry and effort.

Wide range

The wind speed and direction of this device are measured by the ultrasonic principle, so there is no angle limit, 360° Omni-directional, and accurate wind speed and wind direction data can be obtained at the same time.

Good service

We have professional technicians to solve various after-sales problems for you, such as wiring problems, installation problems, reading problems, etc. Ultrasonic anemometers provide a one-year warranty. In addition, we have a large inventory and fast delivery. Guaranteed to ship within 24 hours.

FAQ

More information about ultrasonic anemometers

Q: What is ultrasound?

Ultrasound is a sound wave with a frequency higher than 20000 Hz. It is named after its lower frequency limit is greater than the upper limit of human hearing. It has good directivity, strong reflection ability, and is easy to obtain concentrated sound energy.

Q: Why use an ultrasonic anemometer to measure wind speed and direction?

Compared with the mechanical wind speed and direction sensor, the ultrasonic anemometer has higher measurement accuracy and more stable performance. The structure of the measurement terminal is relatively simple. In many applications, it replaces traditional mechanical wind speed and direction sensors.

Q: How does the ultrasonic anemometer work?

The working principle of the ultrasonic anemometer is that the propagation time of sound waves in the air will be affected by the wind speed component parallel to the propagation direction. The basic components of the ultrasonic anemometer are composed of ultrasonic transmitters and receivers located at opposite ends of the sampling space.